Pregled nacrta
Basis for this method is the laboratory sample obtained by the method specified in ISO 948. The principle of determination consists in grinding the laboratory sample, which has been previously mixed, to obtain particles of the size specified in the International Standard appropriate to the spice or condiment concerned or, if not so specified, to obtain particles of size approximately 1 mm.
This document specifies definitions, principles of construction (but not dimensions) and design, requirements on performance and operation as well as methods for testing the performance of adjustable chemical dosing systems for conditioning water intended for human consumption inside buildings (see [1]) which are permanently connected to the mains supply.
ISO 10322-1:2016 specifies requirements for the optical and geometrical properties of all semi-finished single-vision and multifocal spectacle lens blanks.
This document specifies the requirements for declaration and verification of vibration emission values of continuous, frequency-weighted and repeated shock vibrations. It applies to hand-arm and whole-body vibration values achieved by measurements according to type-B and type-C standards. It
- gives guidance on the declaration of vibration emission values,
- describes vibration and product information to be given in the instruction for use supplied with the machinery,
- specifies the method for verifying the declared vibration emission values stated in the instruction for use of the machinery.
ISO 12052:2017, within the field of health informatics, addresses the exchange of digital images and information related to the production and management of those images, between both medical imaging equipment and systems concerned with the management and communication of that information.
ISO 12052:2017 facilitates interoperability of medical imaging equipment by specifying:
- for network communications, a set of protocols to be followed by devices claiming conformance to this document;
- the syntax and semantics of Commands and associated information which can be exchanged using these protocols;
- for media communication, a set of media storage services to be followed by devices claiming conformance to this document, as well as a File Format and a medical directory structure to facilitate access to the images and related information stored on interchange media;
- information that is to be supplied with an implementation for which conformance to this document is claimed.
ISO 12052:2017 does not specify:
- the implementation details of any features of the DICOM standard on a device claiming conformance;
- the overall set of features and functions to be expected from a system implemented by integrating a group of devices each claiming conformance to this document;
- a testing/validation procedure to assess an implementation's conformance to this document.
ISO 12052:2017 pertains to the field of medical informatics. Within that field, it addresses the exchange of digital information between medical imaging equipment and other systems. Because such equipment may interoperate with other medical devices and information systems, the scope of this document needs to overlap with other areas of medical informatics. However, this document does not address the full breadth of this field.
ISO 12052:2017 has been developed with an emphasis on diagnostic medical imaging as practiced in radiology, cardiology, pathology, dentistry, ophthalmology and related disciplines, and image-based therapies such as interventional radiology, radiotherapy and surgery. However, it is also applicable to a wide range of image and non-image related information exchanged in clinical, research, veterinary, and other medical environments.
ISO 12052:2017 facilitates interoperability of systems claiming conformance in a multi-vendor environment, but does not, by itself, guarantee interoperability.
This European Standard specifies the requirements for the digital automatic coupler (DAC) for freight compliant with the Technical Specification relating to the subsystem ‘rolling stock — freight wagons’ of the rail system in the European Union Commission Regulation (EU) No 321/2013 of 13 March 2013 and repealing Decision 2006/861/EC and EU regulation 2019/776.
Commission Regulation (EU) No 1302/2014 of 18 November 2014 concerning a technical specification for interoperability relating to the ‘rolling stock — locomotives and passenger rolling stock’.
This standard specifies the minimum interface requirements to allow automatic coupling (mechanical and pneumatic) of two digital automatic couplers. The standard further specifies the mechanical interfaces needed for the interoperability of electrical couplers. It does not cover the electrical contacts needed.
The standard covers the requirements for DACs integrated into locomotives.
Coupler-to-coupler interfaces for the Hybrid coupler solutions will be covered in this standard.
All non-mechanical interfaces such as the digital and electrical requirements needed for the DAC are defined in the scope of CENELEC/TC9X/WG 15-10.
This document specifies general requirements and test methods for portable dental equipment for use in non-permanent healthcare environments.
Portable dental equipment within the scope of this document includes portable dental units, portable patient chairs, portable operator's stools, portable operating lights, portable suction source equipment, portable air compressors and other portable dental equipment in instances where these devices are designed and constructed to be transported for use in non-permanent healthcare environments.
NOTE Particular requirements for specific types of portable dental equipment for use in non-permanent healthcare environments are specified in subsequent parts of this document.
This document does not apply to stationary dental equipment, wearable equipment (such as headlamps and loupes), mobile dental equipment or portable dental equipment that is not intended to be used in non-permanent healthcare environments or not designed to be disassembled, folded or packed for human transport between non-permanent healthcare environments. Also, requirements for stationary dental equipment that can be installed in a dental mobile medical facility (e.g. vehicular or containerized mobile dental clinic) are not considered in this document.
ISO 10993-11:2017 specifies requirements and gives guidance on procedures to be followed in the evaluation of the potential for medical device materials to cause adverse systemic reactions.
This document specifies requirements and test methods for operating lights used in the dental office and intended for illuminating the oral cavity of patients. It also contains specifications on the instructions for use, marking and packaging.
This document applies to operating lights, irrespective of the technology of the light source.
This document excludes auxiliary light sources, for example, from dental handpieces and dental headlamps and also operating lights which are specifically designed for use in oral surgery.
This document deals with whole body vibration as a significant hazard. It also specifies the methods for determining the vibration emission transmitted to the whole body of drivers standing and/or seated on freely moveable GSE, when driving for purposes of type evaluation, declaration and methods of verifying vibration emission.
The test results are not applicable to the determination of whole body vibration exposure of persons.
This document specifies requirements and test methods for operating lights used in the dental office and intended for illuminating the oral cavity of patients. It also contains specifications on the instructions for use, marking and packaging.
This document applies to operating lights, irrespective of the technology of the light source.
This document excludes auxiliary light sources, for example, from dental handpieces and dental headlamps and also operating lights which are specifically designed for use in oral surgery.
This document deals with whole body vibration as a significant hazard. It also specifies the methods for determining the vibration emission transmitted to the whole body of drivers standing and/or seated on freely moveable GSE, when driving for purposes of type evaluation, declaration and methods of verifying vibration emission.
The test results are not applicable to the determination of whole body vibration exposure of persons.
ISO/IEC 17024:2012 contains principles and requirements for a body certifying persons against specific requirements, and includes the development and maintenance of a certification scheme for persons.
This document specifies a process for a medical laboratory to identify and manage the risks to patients, laboratory workers and service providers that are associated with medical laboratory examinations. The process includes identifying, estimating, evaluating, controlling and monitoring the risks.
The requirements of this document are applicable to all aspects of the examinations and services of a medical laboratory, including the pre-examination and post-examination aspects, examinations, accurate transmission of test results into the electronic medical record and other technical and management processes described in ISO 15189.
This document does not specify acceptable levels of risk.
This document does not apply to risks from post-examination clinical decisions made by healthcare providers.
This document does not apply to the management of risks affecting medical laboratory enterprises that are addressed by ISO 31000, such as business, economic, legal, and regulatory risks.